Toshiba B-SX4T-GS20-QM-R manual Head position

gReflective sensor (when using a manual threshold value)

Printing takes place according to the parameters designated by the Label Size Set Command. However, the black mark provided on the back of the tag paper is automatically sensed by the reflective sensor and the paper position is finely adjusted for every piece, according to the value set by the threshold setting operation (key operation).

(4)Issue mode

[C: Batch mode (Cut interval: 0, Issue count: 3)]

• “Automatic forward feed standby” is set to OFF in the system mode.

Head position

(1) Idling (at the home position)

A

(2) Prints the 1st label (A).

A

B

(3) Prints the 2nd label (B).

A

B

C

(4) Prints the 3rd label (C).

[C: Batch mode (Cut interval: 0, Issue count: 3)]

• “Automatic forward feed standby” is set to ON in the system mode.

Head position

		A
	A	B
A	B	C
A	B	C

(1)Idling (during the forward feed standby)

(2)Feeds back to the home position.

(3)Prints the 1st label (A).

(4)Prints the 2nd label (B).

(5)Prints the 3rd label (C).

(6)After 1 second, performs 13.7-mm automatic forward feed.

- 166 -