[E: Strip (Feed mode: E)]
Expansion I/O is installed:
The strip sensor is ignored. A feed is performed by checking a PAUSE signal generated from the expansion I/O.
Strip position Head position
(1) Place paper.
The PAUSE signal generated from the expansion I/O, is turned ON.
(2)Remove the label.
The PAUSE signal generated from the expansion I/O, is turned OFF.
(3)Feeds back to the home position.
(4)Completes a feed.
(Completes feeding to the top of form and stops) The PAUSE signal generated from the expansion I/O, is turned ON.
Expansion I/O is not installed:
The strip sensor is ignored. A feed is performed.
Strip position Head position
(1) Place paper.
(2) Feeds back to the home position
(3) Completes feeding to the top of form and stops
*1 Feed mode E is different from feed mode D. In feed mode E, a label is fed, regardless of whether or not a label to be stripped is placed.
*2: The peripheral device such as an applicator, must control the PAUSE signal generated from the expansion I/O.
- 184 -
