Toshiba B-SX4T-GS20-QM-R manual

Explanation

Xfgggggggg: User block access password execution setting (Effective only when the Hibiki tag is used for the B-SX704-RFID-U2-R.)

Designates a password to access and read a tag of which user block is read-locked.

Up to five user blocks can be specified continuously.

For example: X4AABBCCDD,X5BBCCDDEE,X6CCDDEEFF

f:Designates a user area bank. (4 to 8)

4:Bank4 (User block 1)

5:Bank5 (User block 2)

6:Bank6 (User block 3)

7:Bank7 (User block 4)

8:Bank8 (User block 5)

gggggggg:User block access password Fixed to 8-digit hexadecimal number 00000000 to FFFFFFFF

(1)The parameter, “Number of bytes to be read”, is effective only when RFID read mode is set to 1 or 3, as this parameter is intended for reading user data. When reading tag ID, this parameter is ignored.

(2)When the value exceeding the maximum number of bytes storable in a tag is designated for “Number of bytes to be read”, a read error results.

(3)When the number of bytes to be read is omitted, the user data and the ID bytes of the specified data bytes will be returned in accordance with the tag types, as shown in the table below.

Tag type	Number of user data bytes
EPC Class 0	8 bytes
EPC Class 1	8 bytes
Tag-it	32 bytes
I-Code	44 bytes
C220	9 bytes
C320	32 bytes
ISO15693	32 bytes
C210	0 bytes
C240	224 bytes
ISO18000-6B	32 bytes
EPC Class 1	8 bytes
Generation 2
Tag type	Number of ID bytes
EPC Class 0	12 bytes
EPC Class 1	8 bytes or 12 bytes
Tag-it	4 bytes
I-Code	8 bytes
C220	5 bytes
ISO15693	8 bytes
C210	8 bytes
C240	8 bytes
ISO18000-6B	8 bytes
EPC Class 1	8 bytes or 12 bytes
Generation 2

- 251 -