Toshiba B-SX4T-GS20-QM-R manual

Refer to

(3)The Bit Map Font Format Command may be connected to the Outline Font Format Command when transmitted.

[ESC] P C001; 0100, 0150, 1, 1, A, 00, B [LF] C002; 0350, 0180, 1, 1, A, 00, B [LF]

C005; 0200, 0300, 25, 2, C, +05, 00, B, +0000000001 [LF] V01; 0500, 0400, 0100, 0100, A, 00, B [LF] [NUL]

(4)When the drawing data is changed per label issue during printing, the drawing data field for the previous label is automatically cleared using the character string number. Then the next drawing data is printed. Therefore, the character string number which differs according to the drawing fields should be designated. Since the automatic field clear is not performed between the Clear Command ([ESC] C) and Issue Command ([ESC] XS), the fixed data may be drawn using the same character string number. In this case, the Format Command and Data Command should be sent alternately. (After the Issue Command is sent, the fields with the same character string number are automatically cleared until the Clear Command is sent.)

(5)The link field designation can be cleared by omitting the link field designation using the same character string No. and reformatting data.

The link field designation can also be cleared by the Image Buffer Clear Command.

(6)A print data string and the link field No. cannot be programmed at the same time.

Bit Map Font Data Command ([ESC] RC)

Outline Font Format Command ([ESC] PV)

Bar Code Format Command ([ESC] XB)

- 73 -