Toshiba B-SX4T-GS20-QM-R manual 215

Notes

(1)The print origin of coordinates must be set so that the result of drawing the graphic data will be within the effective print area set by the Label Size Set Command ([ESC] D).

(2)The number of graphic width dots and the number of graphic height dots must also be set so that the result of drawing the graphic data will be within the effective print area set by the Label Size Set Command ([ESC] D) in the same manner as the above.

(3)Both width and height are 8 dots/mm and 12 dots/mm for the B-SX4T and the B- SX5T, respectively.

(4)The actual result of drawing may deviate within ±0.5 mm and ±0.33 mm for the B- SX4T and the B-SX5T, respectively, in the X direction with respect to the designated print origin of the X-coordinate.

To draw the received graphic data at high speed, the data is directly developed in the image buffer without applying correction to each bit with respect to the designated X-coordinate. Consequently, an error of up to 4 bits occurs.

[Effective print area] [mm]

		Model
	Issue mode
Item
Effective print width			Min.
			Max.
Effective print
length
	Label		Min.
			Max.
	Tag		Min.
			Max.

		B-SX4T					B-SX5T
			Cut					Cut
		Swing	Rotary cutter				Swing	Rotary cutter
Batch	Strip	cutter	Head-up	Head-up	Batch	Strip	cutter	Head-up	Head-up
			operation	operation				operation	operation
			not	performed				not	performed
			performed					performed
		10.0					10.0
		104.0					128.0
			3 ips:	3 ips:				3 ips:	3 ips:
			79.0	30.0				79.0	23.0
6.0	21.4	23.0	6 ips:	6 ips:	6.0	21.4	23.0	5 ips:	5 ips:
			91.0	30.0				87.0	23.0
			10 ips: –	10 ips: –				8 ips:	8 ips:
			(NOTE 1)	(NOTE 1)				98.0	23.0
1496.0			1492.0		1496.0			1492.0
			3 ips: 28.0					3 ips: 28.0
8.0	–	23.4	6 ips: 28.0		8.0	–	23.4	5 ips: 28.0
			10 ips: – (NOTE 1)					8 ips: 36.0
1498.0	–		1498.0		1498.0	–		1498.0

NOTE 1: The use of the rotary cutter at 10 ips is not supported for the B-SX4T.

- 215 -