Toshiba B-SX4T-GS20-QM-R manual KEY Operation Functions, System Mode Functions

4. KEY OPERATION FUNCTIONS

4.1 SYSTEM MODE FUNCTIONS

The system mode has the following functions for the printer self-test and setting various parameters. For details, refer to Key Operation Specification (TAA-1379).

(1)Self-test

•Maintenance counter/various parameters printouts

•Automatic self-test

•Head broken dots check

(2)Various parameters settings

•Character code selection

•Selection of font 0

•RS-232C communication speed

•RS-232C data length

•RS-232C stop bit length

•RS-232C parity

•RS-232C transmission control

•Language for LCD messages

•Forward feed standby

•Forward feed standby action

•Head-up operation in cut issue mode or the use of the rewinder in batch issue mode

•Installed solenoid type setting

•Use of ribbon saving system

•Control code

•Peel-off wait status selection

•[FEED] key function

•Kanji code selection

•Euro code setting

•Automatic head broken dots check

•Centronics ACK/BUSY timing setting

•Web printer function setting

•Reset process when the nInit signal is ON

•Ribbon near end detection setting

•Expansion I/O operation mode

•Centronics operation mode

•Plug-and-play operation mode

•Label end/ribbon end process setting

•Pre-peel-off process setting

•Back feed speed setting

•MaxiCode specification setting

•Print head type setting

•System mode password operation setting

•XML specification setting (supported by V4.4A and Xx.x only)

- 24 -