
[E: Strip mode (Issue mode: E)]
The expansion I/O is installed:
The strip sensor is ignored. An issue is performed by checking a PAUSE signal generated from the expansion I/O.
Strip position Head position
A
B
C
(1)Idling
The PAUSE signal generated from the expansion I/O, is turned ON.
(2)The PAUSE signal generated from the expansion I/O, is turned OFF.
Feeds back to the home position.
(3)Completes printing the 1st label (A).
The PAUSE signal generated from the expansion I/O, is turned ON.
(4)Remove the 1st label (A).
The PAUSE signal generated from the expansion I/O, is turned OFF.
(5)Feeds back to the home position.
(6)Completes printing the 2nd label (B).
The PAUSE signal generated from the expansion I/O, is turned ON.
(7)Remove the 2nd label (B).
The PAUSE signal generated from the expansion I/O, is turned OFF.
(8)Feeds back to the home position.
(9)Completes printing the 3rd label (C).
The PAUSE signal generated from the expansion I/O, is turned ON.
*When the PAUSE signal generated from the expansion I/O is on, a label is not printed.
- 172 -