Operating The Freedom SW 3000
Monitoring the Freedom SW 3000 Indicator Lights
The ten indicator lights on the front panel show you the operating status of the Freedom SW 3000. A description of the lights is provided in Table 3.
If none of the front panel lights are on, see “Troubleshooting Reference” on page 47.
Table 3 Front Panel Lights |
| ||
Light |
|
|
|
|
|
| |
Illuminated | Color | Status | Action or Status Item |
|
|
|
|
AC Charge | Green | When the Freedom | You can run your |
|
| SW 3000 is connected | appliances from an |
|
| to a qualified AC | AC source like the |
|
| source or a generator, | utility grid or a |
|
| the External AC light | generator. |
|
| illuminates. |
|
Inverter | Green | When inverter mode is | You can run your |
Enable |
| enabled, the Inverter | appliances from the |
|
| Enable Light is | inverter. |
|
| illuminated. If Utility |
|
|
| is unavailable and |
|
|
| operating conditions |
|
|
| are met, the Freedom |
|
|
| SW 3000 will produce |
|
|
| AC voltage to power |
|
|
| your loads. |
|
Table 3 Front Panel Lights |
| ||
Light |
|
|
|
|
|
| |
Illuminated | Color | Status | Action or Status Item |
|
|
|
|
Fault | Red | A fault has occurred | Investigate and clear |
|
| on the network. | the fault condition. |
Faults and Warnings
A fault affects the operation of the unit. A manual fault requires user intervention by clearing the condition and then pressing the Reset button on the inverter/charger’s front panel. See the System Control Panel Owner’s Guide for information on clearing faults from the SCP.
A warning alerts you to a condition that could possibly affect operation of the unit.
See “Faults and Warnings” on page 21 for more explanation on the difference between faults and warnings.
Monitoring Status Messages on the SCP
Refer to “System Menu Map” on page 26 of the Configuration chapter.
21 |
