Xantrex Technology SW 3000 user service Supplied Accessories

Freedom SW 3000 Inverter/Charger Features

Supplied Accessories

1

2

3

4

Figure 6 Supplied Accessories

NOTE: If any of the supplied accessories are missing, contact Xantrex or any authorized Xantrex dealer for replacement. See “Contact Information” on page i.

Item Description

1Two DC terminal covers are supplied to prevent accidental contact with the DC cable connectors after installation. The red cover is for the positive cabling terminal, and the black cover is for the negative cabling terminal.

2BTS, the Battery Temperature Sensor consists of:

•Connector plugs into the BTS jack on the Freedom SW 3000.

•Sensor cable is 25 feet (7.6 meters).

•Sensor can be mounted on the side of the battery case or on the negative battery terminal.

NOTE: The BTS continuously measures the temperature of the battery and adjusts the charger output for a more accurate, temperature-compensated charge.

3Freedom Sine Wave remote panel (with 25-ft communications cable) is functionally similar to the Inverter Enable button on the unit’s front panel. It enables and disables the Freedom SW 3000’s inverter mode remotely. Connects to the REM jack on the Freedom SW 3000.

4Two sets of nuts and washers are used to secure DC cable ends to the DC terminals.

10 Freedom SW 3000 Owner’s Guide