Configuration
Viewing the System Screen
The System screen displays system activity. The information appearing on the System screen varies with the status of the inverter/charger: Standby, Inverting, Charging, AC Bypass, or Equalize. See “Modes” on page 31 for an explanation of the different modes. For example, Figure 14 shows the Freedom SW 3000 in the float stage of charging.
Viewing the Select Device Menu
The Select Device menu is where you can view a list of all the Xanbus- enabled devices in your power system.
To view the Select Device menu:
◆On the System screen, press Enter.
The Select Device menu appears with Freedom SW 3000 highlighted, as shown in Figure 15.
menu
Figure 14 Float System Screen (Example) |
|
You cannot select or change any of the information on the System screen. If | Figure 15 Select Device Menu |
you would like to view more detailed information, press the Enter button |
|
(indicated by the menu arrow) to go to the Select Device menu. |
|
27 |
