Specifications
Charger Specifications
Without a battery temperature | Three settings with the following |
sensor | temperature values: |
| Cool 50 °F (10 °C) |
| Warm 77 °F (25 °C) |
| Hot 104 °F (40 °C) |
| The default value for this setting is |
| Hot, and it can only be changed by a |
| dealer, factory, or service centre. |
|
|
With a battery temperature | The temperature compensation |
sensor | coefficients on a 12 volt battery are as |
| follows: |
| Flooded: 27 mV × (25 °C – BTS °C) |
| Gel: 27 mV × (25 °C – BTS °C) |
| AGM: 21 mV × (25 °C – BTS °C) |
|
|
Equalization cycle | Yes, manual via SCP |
|
|
Number of independent battery | 1 |
banks |
|
|
|
Battery bank size settings | 50 – 2000 Ahr |
|
|
Battery type settings | Flooded, AGM, Gel, Custom |
|
|
Power factor corrected | Yes |
charging |
|
|
|
Input power factor at full | > 0.95 |
charge rate |
|
|
|
Charger Specifications
AC input voltage | 85 | – 135 VAC |
|
|
|
AC input frequency | 60 | Hz nominal, 55 – 65 Hz operating |
| range | |
|
| |
Minimum battery voltage | 5.0 VDC | |
|
| |
Maximum DC output voltage | 16.0 VDC | |
|
| |
Peak charger efficiency | ≥ 84% | |
|
| |
Maximum charge current | 150 A | |
|
| |
Maximum charge current | 150 A | |
|
|
|
62 | Freedom SW 3000 Owner’s Guide |
