Troubleshooting
Warning Messages
Only Battery Low warning exists for the FSW3000. This warning will be recorded with a time stamp showing the date and time that the warning appeared. The warnings have been recorded with a time stamp to let you know the date and time that the warning appeared. See “Warning Types” on page 46 for an explanation of automatic and manual warnings.
You can view the warning by selecting Warning Log from the Device Info menu in the Freedom SW 3000 Advanced Menu.
To view a message from a warning list:
1.On the list, use the up arrow or down arrow button to highlight the message you want to view.
2.Press Enter.
The complete message appears.
After viewing the message, you can return to the warning list by pressing Exit or continue to the menu for the device that caused the fault by pressing Enter. Each time you return to the list after viewing a complete message, the viewed message is removed from the list.
If you have left the warning list, you can view them at any time from the System Settings menu.
To view a fault list:
1.On the Select Device menu, highlight System and press Enter.
2.On the System Settings menu, highlight View Warning List.
3.Press Enter.
Table 8 provides a detailed description of the warning message and solution.
Table 8 Warning Message
Warning |
| Warning |
|
|
Number | Message | Type | Cause | Solution |
|
|
|
|
|
W12 | Battery | Automatic | DC Under | Recharge |
| voltage is |
| Voltage | batteries and |
| getting low. |
| Warning | check |
| Recharge |
|
| battery |
| battery. |
|
| cables from |
|
|
|
| inverter to |
|
|
|
| batteries for |
|
|
|
| loose |
|
|
|
| connections. |
|
|
|
|
|
49 |
