Toshiba B-SX4T-GS20-QM-R manual SX5, SX704-RFID-U2-EU/US/CN/AU-R, Auto

Parameter			Initial Value
Centronics operation mode			SPP
Plug-and-play operation mode			OFF
Label end/ribbon end process setting			TYPE1
Pre-peel-off process setting			OFF
Back feed speed			3”/sec
MaxiCode specification setting			TYPE1
Print head type setting	B-SX4		V2 type: TPH104R7
	B-SX5		V2 type: TPH128R5
Status response			ON
Label pitch			76.2 mm
Effective print length			74.2 mm
Effective print width		B-SX4	104.0 mm
		B-SX5	128.0 mm
Print method			Thermal transfer print mode
Type of sensor			Transmissive sensor
Feed speed		B-SX4	6”/sec
		B-SX5	5”/sec
Issue mode			Batch
PC save automatic call			ON
			Save No. on the CPU board (ID) 01
BASIC interpreter setting			OFF
BASIC interpreter trace setting			OFF
DHCP setting			OFF
RFID module type selection			None
RFID tag type selection			None
RFID module’s destination code setting			Depends on the module setting.
RFID error tag detection			OFF
Password to protect error tag detection			OFF: 0000
Access password setting			00000000
Automatic unlock function setting			OFF
Max. number of RFID issue retries			3
Max. number of RFID read retries			5
RFID read retry timeout			4.0 sec.
Max. number of RFID write retries			5
RFID write retry timeout			2.0 sec.
RFID adjustment for retry			Invalid: 0 mm
RFID radio output power level setting			B-9704-RFID-U1: 251
			B-SX704-RFID-U2: 18
			B-9704-RFID-U1-EU-R: 50
			B-SX704-RFID-U2-EU/US/CN/AU-R: 18
RFID AGC threshold setting			0
RFID channel setting			AUTO
Q value			0
AGC threshold for data write			0
AGC threshold lower limit for retry			0
Hibiki tag multi-word write			0: OFF
Number of times RFID write succeeded			0
Number of times RFID write failed			0
System mode password operation setting			OFF

- 28 -