Toshiba B-SX4T-GS20-QM-R manual Byte Writable Character Code Range Command

			Page
6.3.21		2-BYTE WRITABLE CHARACTER CODE RANGE COMMAND	197
6.3.22		BIT MAP WRITABLE CHARACTER COMMAND ([ESC] XD)	198
6.3.23		BIT MAP WRITABLE CHARACTER COMMAND ([ESC] XA)	199
6.3.24		GRAPHIC COMMAND	210
6.3.25		SAVE START COMMAND ([ESC] XO)	218
6.3.26		SAVE START COMMAND ([ESC] XV)	219
6.3.27		SAVE TERMINATE COMMAND	220
6.3.28		SAVED DATA CALL COMMAND ([ESC] XQ)	221
6.3.29		SAVED DATA CALL COMMAND ([ESC] XT)	222
6.3.30		HEAD BROKEN DOTS CHECK COMMAND	223
6.3.31		MESSAGE DISPLAY COMMAND	224
6.3.32		RESET COMMAND	226
6.3.33		STATUS REQUEST COMMAND	227
6.3.34		RECEIVE BUFFER FREE SPACE REQUEST COMMAND	228
6.3.35		VERSION INFORMATION ACQUIRE COMMAND	229
6.3.36		ATA CARD INFORMATION ACQUIRE COMMAND	230
6.3.37		ATA CARD WRITABLE CHARACTER INFORMATION ACQUIRE COMMAND	232
6.3.38		PRINTER OPTION STATUS ACQUIRE COMMAND	233
6.3.39		IP ADDRESS SET COMMAND	234
6.3.40		SOCKET COMMUNICATION PORT SET COMMAND	235
6.3.41		DHCP FUNCTION SET COMMAND	236
6.3.42		PASS-THROUGH COMMAND	237
6.3.43		INTERNAL SERIAL INTERFACE PARAMETER SET COMMAND	238
6.4 COMMANDS FOR SYSTEM ADMINISTRATOR			239
6.4.1		PARAMETER SET COMMAND	239
6.4.2		FINE ADJUSTMENT VALUE SET COMMAND	243
6.4.3		RFID PARAMETER SET COMMAND	245
6.4.4		BATCH RESET COMMAND	247
6.5 COMMANDS RELATED TO RFID			248
6.5.1		RFID TAG POSITION ADJUSTMENT COMMAND	248
6.5.2		RFID TAG READ COMMAND	250
6.5.3		RFID VOID PATTERN PRINT COMMAND	254
6.5.4		RFID DATA WRITE COMMAND	255
7.	CONTROL CODE SELECTION		261
8.	ERROR PROCESSING		262
8.1	COMMUNICATION ERRORS		262
8.2 ERRORS IN ISSUING OR FEEDING			262
8.3 ERRORS IN WRITABLE CHARACTER AND PC COMMAND SAVE MODES			265
8.4	SYSTEM ERRORS		265
8.5	RESET PROCESSING		265
8.6	RFID ERROR		266

ii