Toshiba B-SX4T-GS20-QM-R manual

Models: B-SX4T-GS20-QM-R

1 374
Download 374 pages 34.06 Kb
Page 196
Image 196

Refer to

Example

In case that the size of BASIC file storage area is set to “AA”:

(9)When this command is received, the BASIC file storage area is reserved and the other areas in flash ROM on the CPU board are cleared.

(10)If this command is not sent, the storage area in flash ROM on the CPU board cannot be used.

If “AA” is set for the size of the BASIC file storage area with the BASIC file storage area being unallocated, the BASIC file storage area remains unallocated.

(11)The storage areas except for the BASIC file storage area are allocated in the following order of precedence – the TrueType font storage area, and the bit map writable character storage area. After these storage areas are allocated, the remaining area is used for the PC save area.

(12)If the sum of the TrueType font storage area and the bit map writable character storage area, specified by this command, is the size of ‘896 KB minus the BASIC file storage area size’, the TrueType font storage area and the bit map writable character storage area are allocated as specified. In this case, however, there is no PC save area.

(13)If the sum of TrueType font storage area and the bit map writable character storage area, specified by this command, exceeds the size of ‘896 KB minus the BASIC file storage area size’, the TrueType font storage area is allocated as specified with the highest priority. Then, the remaining area is allocated to the bit map writable character storage area. There is no PC save area.

(14)When “00” (0 KB) is specified for each of the TrueType font storage area and the bit map writable character storage area, the storage area is not allocated.

(15)If the size of ‘896 KB minus the BASIC file storage area size’ or more is specified for either the TrueType font storage area or the bit map writable character storage area, each area other than the BASIC file storage area is allocated as specified.

For example, when setting “10” or “11” for the size of the TrueType font storage area while the BASIC file storage area secures “4” (256KB), the entire storage areas except the BASIC file storage area are allocated to the TrueType font storage area. There is no bit map writable character storage area or PC save area.

Bit Map Writable Character Command ([ESC] XD)

Save Start Command ([ESC] XO)

Flash Memory Format Command ([ESC] J1)

2-byte Writable Character Code Range Command ([ESC] XE)

The TrueType font storage area and bit map writable character storage area are set to 640 KB and 192 KB, respectively.

(PC save area: 896 KB - 640KB - 192 KB = 64 KB) [ESC] XF; 10, 03, 00 [LF] [NUL]

- 192 -

Page 196
Image 196
Toshiba B-SX4T-GS20-QM-R manual