Toshiba B-SX4T-GS20-QM-R manual Rfid Parameter SET Command, ESC Z2

6.4.3 RFID PARAMETER SET COMMAND [ESC] Z2; 3

Function

Sets RFID related parameters on the printer.

Format

Term

[ESC] Z2; 3, abbcdddeeeffggghhijjkkkllmnnooppq [LF] [NUL]

a:RFID module type selection

0:Not installed.

1:H1 (B-9704-RFID-H1-QM)

2:U1 (B-9704-RFID-U1-US/EU(-R))

3:H2 (B-SX704-RFID-H2)

4:U2 (B-SX704-RFID-U2-EU/US/CN/AU-R)

bb:Tag type

00:None

11:I-Code

12:Tag-it

13:C220

14:ISO15693

15:C210

16:C240

17:C320

21:EPC Class 0

22:EPC Class 1

23:ISO 18000-6B

24:EPC Class 1 Generation 2

c:RFID error tag detection

(Invalid from firmware V4.7. This is programmed in the printer system mode.)

0:Not detected.

1:Detected.

ddd:Max. number of RFID issue retries 000 to 255

eee:Max. number of RFID read retries 000 to 255

ff:RFID read retry time-out

00 to 99 (In units of 0.1 sec.: 0.0 sec. to 9.9 sec.)

ggg:Max. number of RFID write retries 000 to 255

hh:RFID write retry time-out

00 to 99 (In units of 0.1 sec.: 0.0 sec. to 9.9 sec.)

i:Feed direction of adjustment for retry +: Backward

−: Forward

jj:Feed amount of adjustment for retry

00 to 99 (In units of 1 mm: 0 mm to 99 mm)

Only the value of −3 mm or less, or +3 mm or more becomes effective.

kkk:RFID wireless power level 000 to 255

- 245 -