Motorola 3460 manual Options Stored in Status S- Registers

3460 Fast’R

Options Stored in Status (S-) Registers

Some AT command options are stored in status registers.

S-Register Command Cross-Reference

		Command
		(Default
Register	Parameter	Value)		Description
S0	Ring Count to	ATS0=n	Modem answers a call after ring n
	Answer On*	(0)
S1	Current Ring	ATS1	Counts rings (view only)
	Count*	(0)
S2	Escape Code	ATS2=x	Defines character used to change
	Character*	(43)	from data mode to command
			mode.
S3	Return	ATS3=x	Set command-line termination
	Character*	(13)	character
S4	Line Feed	ATS4=x	Set response formatting character
	Character*	(10)
S5	Backspace	ATS5=x	Set command-line editing
	Character*	(8)	character
S6	Wait For Dial Tone	ATS6=n	Set duration
		(3)
S7	Wait For Data	ATS7=n	Set duration
	Carrier	AT*DD9	Dial Wait=S7
	(Country-specific	AT*TT5	Call Timeout=S7
	for France only)	(30)
S8	Dial Modifiers	ATS0=x	Set comma character
		(3)
S10	DCD Loss	ATS10=n	Set delay duration; varies with the
	Disconnect	(15)	modulation mode:
			• V.34, V.32:
			—	0=Disabled
			—	1-19=Specified sec.
			—	20-255=20 sec.
			• V.22bis, V.21, B212, B103:
			—	0=Disabled
			—	1-255=Specified 0.1 sec

*Changed values are not automatically stored to non-volatile memory. To retain changed values, save them to an option set.

B-31