Motorola 3460 manual Secondary Channel, Network Control Override Mode

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
*NE		Secondary Channel
		The AT*NE command controls secondary channel
		operation. You can enable and disable the secondary
		channel through the AT ACU, Fast’RVu (Commands
		menu), or an NMS. The option is saved in non-volatile
		memory.
		For more information, refer to the “Network Manage-
		ment (AT*NE)” section in Chapter 3.
	0	=On. Enables the secondary channel.
	1	=Off. Disables the secondary channel.
*NO		Network Control Override Mode
		When this parameter is enabled, a modem ignores
		network management commands, except status requests.
		When you connect to a modem that has Network
		Override enabled, Fast’RVu indicates this with the
		orange OR LED in its display.
		For more information, refer to the “Network Manage-
		ment (AT*NE)” section in Chapter 3.
	0	=Off. Disables network management override.
	1	=On. Enables network management override.
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-15