Motorola 3460 manual Network Control Pass Through

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
*NP		Network Control Pass Through
		Pass Through options affect only dial connections. Pass
		Through options determine:
		• How and whether a local modem passes network
		management commands to a remote modem
		• How and whether a remote master modem passes
		network management commands to other modems
		connected to it by:
		— Cables between their NM IN and NM OUT ports
		— A shared AccessWay enclosure backplane
		For more information, refer to the “Network Manage-
		ment (AT*NE)” section in Chapter 3.
	0	A local modem, connected through its NC IN port to a
		local manager:
		• Passes only the NC commands that are addressed to a
		remote modem from its NC IN port to the in-band
		secondary channel
		• Passes only responses that are addressed from a
		remote modem to the local manager from the
		secondary channel to its NC OUT port.
		A remote modem receiving the local modem’s
		commands does not pass them to its NC OUT port.
	1	A local modem, connected through its NC IN port to a
		local manager,:
		• Passes only the NC commands that are addressed to
		the location (local address +100) from its NC IN port
		to the in-band secondary channel
		• Passes only responses that are addressed from a
		remote modem to the local manager from the
		secondary channel to its NC OUT port.
	2	A local modem, connected through its network control-
		in (NC IN) port to a local manager, passes all NC
		commands to and from a remote modem, without
		filtering.
		The remote modem operates the same way.
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-16