Motorola 3460 manual Asynchronous Operation, Entering Commands to the Modem, Step Stage

3460 Fast’R

Asynchronous Operation

Entering Commands to the Modem

If you use a communications program to enter commands: the commands shown here are typical AT commands, but communications- program command syntaxes vary, so use this procedure only as a guide.

If your modem has the four-button/LCD user interface, you can use the menu-tree commands to enter information. Refer to Appendix D for details.

Setting Up for Asynchronous (Dial) Operation

Basic Setup for Async Dial-Up Operation

Step	Stage
1.	Run a communications program. Assign the modem to one of the
	computer’s serial communications (COM) ports.
2.	Optionally: store one or more telephone numbers in the modem. To
	enter a number, use this command:
	AT&Zn,x<CR>
	where n is a Phonebook location and x is the telephone number.
3.	Optionally, enter a default initialization string. Example:
	AT&F&V1*EC1S0=1
4.	Optionally: set security options. See the 3460 Fast’R Reference
	Guide. Security options include:
	• Password Verification on Connection
	• Callback Verification and Dial Restriction
	• Configuration/Phone Number Access Restriction

2-2