Motorola 3460 manual Installing a Modem Daughtercard, Vanguard Enclosure, Set-Up

3460 Fast’R

Installing a Modem Daughtercard, Vanguard Enclosure

The Vanguard 3460 V.34 Daughtercard card operates in Vanguard enclosures. For instructions on installing and removing Vanguard Daughtercards, refer to the Vanguard Daughtercard Installation Guide (Part. No. T0020-02).

IMPORTANT: When using a network-management application, such as Fast’RVu, with Vanguard 3460 V.34 Daughtercards, always assign the address Enclosure 1, Slot 9, Modem B to the daughtercard.

The daughtercard always presents itself as a master modem in Slot 9 to the network-management application, regardless of its location.

Set-Up

The Vanguard 3460 V.34 Daughtercard default option set uses an asynchronous protocol. However, the 3460 Daughtercard does not have a computer port, so it cannot be cabled directly to a personal computer.

To configure the 3460 Daughtercard, the preferred method is to connect a personal computer to the modem card network-management port, and use Fast’RVu to set options. Or, to configure for async applications only, set the modem’s Pass Through option. To do this, establish a call from one Vanguard port (e.g., a CTP or PAD) to the 3460 Vanguard daughtercard port, and echo AT commands through to the modem.

1-31