Motorola 3460 manual Managing Option Sets, Selecting and Customizing Option Set

3460 Fast’R

Managing Option Sets

The modem is pre-set with Option Set 1 as the active configuration.

•For asynchronous application protocols, build on Option Set 1 with any custom or site-specific parameter options

•For synchronous and leased-line application protocols, build on Option Set 2 with any custom or site-specific parameter options

Select one of the following procedures to customize an option set. The AT commands you need are listed in Table 3-1 and Table 3-2.

Selecting and Customizing Option Set 1

Manage an asynchronous modem configuration as follows.

Configuring a Modem for Async Operation

Step Stage

1.Issue the ATZ1 command1 to load Option Set 1.

2.Optionally, set custom parameter options.

3.If you set any options in Step 2, issue the AT&W1 command to save the configuration as Option Set 1. (Refer to Table 3-1.)

4.Issue the AT&Y1 command to make the modem use Option Set 1 at subsequent power-ups. Option Set 1 is active.

1You can set options and issue commands in either of these ways:

•By issuing AT commands through a communications application

•With Fast’RVu (see Chapter 4)

Fast’RVu is especially useful for copying configurations to multiple modems.

3-4