Motorola 3460 manual Test Restoral, Call Time-Out

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
	2	=Reliable. In async applications, once the local modem
		connects with a remote modem, it attempts to establish
		an error-corrected link. The modem uses speed
		conversion (if enabled). The local modem disconnects if
		it cannot establish an error-corrected link. Enable
		terminal flow control in this mode. If the modem
		negotiates a connection in V.21 or Bell 103 modulation
		mode, it terminates the call. Note: the modem does not
		support LDL tests in this mode.
	3	=Auto-Reliable. Once the local modem connects with a
		remote modem, it attempts to establish an error-
		corrected link. The modem uses speed conversion
		(if enabled). This lets the modem automatically
		accommodate computers of different rates. The modem
		reverts to Normal mode if it cannot establish an error-
		corrected link.
*TR		Test Restoral
		Determines how often the modem checks for loop
		current on the dial line, to determine whether the line is
		available.
	0	=Never
	1	=Daily
	2	=Weekly
	3	=Monthly
*TT		Call Time-Out
		Determines how long the modem waits from the time it
		completes dialing to the time it detects answer-back tone
		from the remote modem. If the modem does not receive
		answer-back tone from the remote modem within the
		specified time, the modem disconnects.
	0	=Time-out After 30 secs.
	2	=Time-out After 60 secs.
	3	=Time-out After 90 secs.
	5	=Time-Out After Interval Stored in S-Register 7
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-20