Motorola 3460 manual Re-Initialize Memory Now, Guard Tone, Display Modem ID, Line Type, AT Format

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
&F	[none]	Re-Initialize Memory Now
		Resets the modem to factory default settings. Option sets
		are restored to their original settings. Phonebook
		telephone numbers are deleted.
&G		Guard Tone
		Determines the guard tone used in V.22bis operation.
	0	=Off. The modem does not use a guard tone
	1	=550. The modem uses a 550 Hz guard tone
	2	=1800. The modem uses a 1800 Hz guard tone.
&I		Display Modem ID
	0	=Display Software Revision Number
	1	=Display Country Code
	2	=Display Product Code
	4	=Display NC Address (optional)
&L		Line Type
	0	=Dial. The modem operates on dial lines in dial
		applications only.
	1	=2-Wire Leased. The modem operates on a 2-wire
		leased line. The ACU immediately disappears.
	2	=4-Wire Lease. The modem operates on a 4-wire leased
		line. The ACU immediately disappears.
&M		AT Format
		Sets the data format when the AT ACU is in effect.
	0	=Async. The modem communicates asynchronously in
		command and data mode.
	1	=Sync Data. The modem communicates asynchronously
		in command mode (disconnected from the dial line), and
		synchronously in data mode.
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-25