Motorola 3460 +FCLASS=n Service Class, +FCR=n Receive Fax Data, +FLO=n Fax Flow Control, Modem ID

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
+FCLASS=?		Service Class.
		Tests the modem’s Service Class.
	0	Data modem
	1	Service Class 1 fax modem
	2.0	Service Class 2.0 fax modem
+FCLASS=n		Service Class.
		Specifies the modem’s Service Class.
	0	Data modem
	1	Service Class 1 fax modem
	2.0	Service Class 2.0 fax modem
+FCR=n		Receive Fax Data.
		Specifies whether the computer can receive fax data.
	0	No
	1	Yes
+FLO=n		Fax Flow Control
		Specifies the computer/modem flow control.
		The *FL command also controls this value.
	0	None
	1	XON/XOFF in either direction
	2	RTS/CTS
+FMI?		Manufacturer ID
		Requests manufacturer ID from the modem when it is
		operating in Fax Class 1 mode (+FCLASS=1).
		The modem responds as follows:
		Motorola
+FMM?		Modem ID
		Requests modem ID from the modem when it is
		operating in Fax Class 1 mode (+FCLASS=1).
		The modem responds as follows:
		3460
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-29