Motorola 3460 manual Dial Line Filter, Link Telephone Numbers, Low-Speed Operation Protocol

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
	4	=2 hours
	5	=4 hours
*LF		Dial Line Filter
		Enables the modem to improve performance on long
		local loops on dial lines. Site-specific.
	0	=Optimize for long local loops
	1	=Works best on some medium loops
	2	=Optimized for typical short and medium local loops
	3	Not recommended
*LN		Link Telephone Numbers
		Lets you link telephone numbers stored in the modem’s
		Phonebook. You can provide more than one number to
		call in case one is busy. If a call fails and the number is
		linked, the modem pauses and then calls the linked
		number. NOTE: With this feature enabled, the modem
		dials linked numbers before redialing the first number.
		To link numbers, enter AT*LN, followed by the entry n
		of the number you want to link from, a comma, and the
		entry m of the number to link. Example: AT*LN2,4.
		Here, 2 is linked to 4. To clear this link, enter AT*LN2.
	m, n	Link number m to number n
*LS		Low-Speed Operation Protocol
		Determines the low-speed modulation mode used when
		a higher (V.34, V.32bis, V.32, or V.22bis) modulation
		mode connection cannot be made while Mod=V.34
		Auto, V32bis Auto or Auto V32.
		The default option is country-specific.
	0	=Bell
	1	=CCITT
*LXn		Transmit Level for Leased-Line Calls
	n	n=0 to 20 (negative sign is assumed) dB
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-11