Motorola 3460 manual Default Telephone Number to Dial When DTR, 108=On, Receive-Data Buffer Delay

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
*DA		Default Telephone Number to Dial When DTR
		108=On
	0	=Off, no default
	n	=Phonebook entry n, where n = 1 to 4, and a telephone
		number is stored in n
*DB		Receive-Data Buffer Delay
	0	=Disable buffer delay timer
	1	=Enable. Buffer or S-Register 38. Starts the buffer delay
		timer immediately upon detection of the disconnect
		request. When the timer is operating, the modem
		continues to process the transmit or receive buffers. The
		modem disconnects when the buffers are empty or the
		timer expires, whichever occurs first. Note: When the
		modem is set for Direct mode, no data buffering occurs
		and the disconnect is immediate.
	2	=Buffer + S-Register 38. Prevents the timer from
		starting until either the transmit or receive buffers have
		emptied. The modem then disconnects. Once the timer
		expires, when the modem is set to Direct mode, data is
		not buffered and the timer starts immediately.
	3	=S-Register 38. Allows the timer to start immediately
		upon detection of a disconnect request. The request
		continues to process either its transmit or receive
		buffers. The modem disconnects when the timer expires,
		regardless of the buffer states. Note: In Direct mode, no
		data buffering occurs. However, the modem delays a
		disconnect until the timer expires.
*DC		Data Compression
	0	=Disable.
		Motorola recommends that you disable data
		compression when you use remote configuration at rates
		of 9600 BPS and below, because data compression may
		produce fractured command responses that may be
		difficult to interpret. Although the displayed responses
		may be compromised, the configuration function works
		properly with or without data compression.
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-6