Motorola 3460 manual Modem Addresses in Multiple-Enclosure Configurations

3460 Fast’R

Modem Addresses in Multiple-Enclosure Configurations

When you cable enclosures together, their modem slots are assigned the following addresses. Slot numbers and modem locations are marked on the enclosure rear panel. Set each enclosure to a different address.

Table 1-3. Modem Addresses in AccessWay Enclosure

The Enclosure
With This DIP	Has These
Setting	Modem-		Assigned to These
(Fig. 1-9)...	Addresses...		Locations:
DIPs =ON/ON	1 through 32	1 = Slot 1 Position A
		2 = Slot 1 Position B
		3 = Slot 2 Position A
		4 = Slot 2 Position B
		. . .
		32	= Slot 16 Position B
DIPs =ON/OFF	33 through 64	33 = Slot 1 Position A
		. . .
		64	= Slot 16 Position B
DIPs =OFF/ON	65 through 96	65 = Slot 1 Position A
		. . .
		96	= Slot 16 Position B
DIPs =OFF/OFF	97 through 128	97	= Slot 1 Position A
		. . .
		128 = Slot 16 Position B

Asingle-modem card supports a two- or four-wire leased-line connection in Position A, or a dial-line connection in Position B.

With Fast’RVu, select a modem in an AccessWay enclosure as follows.

1.In the Fast’RVu main window, select ENCLOSURE LOCATION.

2.In an option window, specify the modem location. Example: Select Enclosure (Nest) with DIPS at ON/ON; Slot 1; Position A; which is Modem Address 1:

1-20