3460 Fast’R

Warnung

Motorola-Geräte sind grundsätzlich in für Rechner und elektronische Anlagen vorgesehenen Umgebungen zu verwenden. In unwettergefährdeten Bereichen ist jegliche Elektronik gegen Blitzeinwirkung zu schützen. Näheres über entsprechende Schutzeinrichtungen erfahren Sie von Ihrer Telefongesellschaft oder einem Elektrohändler. Probleme mit Spannungsstößen durch Blitzeinwirkung lassen sich durch Einbau von Überspannungsableitern in die zu Motorola- Geräten führenden Netz- und Datenleitungen beheben.

Cabling an AccessWay Enclosure

Connect cables to the AccessWay as follows. See Figures 1-7 and 1-8.

Cabling an AccessWay Enclosure

Step

Action

 

 

1.

In enclosures with mass-termination telephone connectors,

 

attach ferrite beads (Figure 1-7), if they are supplied, to the

 

multi-line cables from the telephone service outlets to the two

 

mass-termination connectors on the AccessWay rear panel.

 

Attach the beads within 2 - 4 cm of the AccessWay panel. Pass

 

the cable straight through the bead, without turns.

 

Note: The AccessWay mass-termination backplane does not

 

support two- or four-wire leased-line/dial-line cards. To mix

 

these cards with two-wire leased-line or dial-line cards, the

 

AccessWay must have the RJ-11 backplane.

 

 

2.

Ensure that telephone lines are configured and connected to the

 

service provider’s outlet or closet connection.

 

 

All cables should be emissions-shielded.

1-16

Page 30
Image 30
Motorola 3460 manual Cabling an AccessWay Enclosure