TECHNICAL INFORMATION
Model No. | EH7500S |
Description Petrol Hedge Trimmer
CONCEPT AND MAIN APPLICATIONS
PRODUCT
P 1/ 25
Model EH7500S is a 22.2cm³
emission regulations, featuring extra light design with further improvements in noise, vibration and handling compared with our current models.
Especially, the lightweight design is outstanding.
4.7kg (10.4lbs) dry weight is the world’s lightest among all petrol hedge trimmers in compliance with any exhaust emission regulation as of February, 2010.
Dimensions: mm (")
Length (L) | 1,150 |
Width (W) | 323 |
Height (H) | 212 |
Specification
Specifications | Model | EH7500S | |
|
| ||
| Type |
| |
Engine Displacement: cm³ |
| 22.2 | |
| Fuel |
| Mixed gasoline |
In compliance with main exhaust emission regulations; | Yes | ||
CARB Tier 3, EPA Phase 2, EU Stage 2 |
| ||
|
| ||
Max. output power: kW (PS) |
| 0.68 (1.0) [at 7,500 min.ˉ¹] | |
Max. torque: N.m |
| 0.9 [at 6,000 min.ˉ¹] | |
Stroke rate at No load: min.ˉ¹ = spm (stroke pre minute) | 4,390 | ||
Fuel tank capacity: L (US oz) |
| 0.4 (13.5) | |
Max. cutting capacity: mm (") |
| 728 | |
Carburetor |
| Diaphragm | |
Starting system |
| Recoil starter | |
Primer pump |
| Yes | |
Clutch |
|
| Yes |
Rotation limiter |
| Yes | |
| Type |
| |
| Length: mm (") |
| 750 |
Blade | Cutting teeth |
| with 3 sharpened edges |
Thickness: mm (") |
| 2.3 (3/32) | |
|
| ||
| Blade drive mechanism |
| Connecting rod drive |
| Tooth spacing: mm (") |
| 35 |
Max. branch diameter*1: mm (") |
| 21.5 (7/8) | |
Net weight*2: kg (lbs) |
| 4.7 (10.4) | |
*1: Indicates maximum diameter of the branch that can be received | |||
between adjacent two blade teeth. (See the figure on right.) |
| ||
*2: Dry weight |
|
| |
Standard equipment | Optional accessories | |
Blade cover | 1 | Chip receiver set |
Socket wrench | 1 |
|
Hex wrench | 1 |
|
Note: The standard equipment for the tool shown above may vary by country.
