
P 13/ 25
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-6. Ignition (cont.)
ASSEMBLING
Fly Wheel
(1)Remove oil completely from Crankshaft.
(2)Align Woodruff key on Crank shaft to the key groove of Fly wheel and mount Fly wheel to Crankshaft.
(3)Turn M6 Hex nut to Crankshaft clockwise by hand and tighten it with Impact driver with 10 mm Socket bit clockwise for 2 second.
Fig. 25
1.Remove Oil completely from Crankshaft.
Woodruff Key
2. Align this Key to the groove in the Fly wheel.
[3] -7. Recoil Starter
DISASSEMBLING
(1)Remove Recoil starter assembly from Blower housing.
Note: Record the position and the pulling direction of Starter knob before disassembling. (Fig. 26)
Fig. 26
| Recoil starter assembly |
Lever case side | Blade side |
Starter knob |
|
Pulling direction |
|