P 14/ 25
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-7. Recoil Starter (cont.)
DISASSEMBLING
(2)Disassemble Recoil starter. (Fig. 27)
Fig. 27
1.Pull out Rope by the length of one or two times turn of the Reel and hold the Reel.
Reel
Notch
Starter knob
Rope
2.Release Starter knob while holding the Reel with your finger and pull the slack Rope inside. Hook the Rope in the notch and turn the Reel counterclockwise while braking the Reel and holding the Rope. Turn Reel until
Spiral spring recoil force is gone.
Reel
Notch
Starter case
Rope
3. Remove Set screw, Cam and Torsion spring.
4.Remove Reel from Starter case.
Note: Do not let Spiral spring leap out in this step.
| Set screw | Reel |
| Cam | |
|
| |
Reel | Torsion spring |
|
Spiral spring
