Motorola 3460 manual Power Up in Option Set, Select Phonebook Entry to Enter, Service Class

		3460 Fast’R
AT Command Set (continued)
Command	Option	Description
&Y		Power Up in Option Set
	0	=Old. On power up the modem uses the last saved
		option set.
	1	=1. On power up the modem uses Option Set 1.
	2	=2. On power up the modem uses Option Set 2.
&Zn	n=1 - 4	Select Phonebook Entry to Enter
		Lets you store a telephone number in the modem’s
		Phonebook, up to 50 characters. Enter AT&Z or
		AT*CN, the entry (1-4), a comma, and the telephone
		number. For example, to store the number
		1-222-555-444 in Entry 3, enter:
		AT*CN3,12225554444<CR>
		If you enter AT&Z or AT*CN without specifying:
		• An entry, the modem stores the number in Entry 1.
		• A telephone number, the specified entry’s telephone
		number is deleted.
		+F Commands
+F commands control fax operation.
For all fax parameters:
• The AT+F[parameter]? command returns the valid options for the parameter, or if the
parameter is not supported, it returns ERROR. An example, showing the +FCLASS
parameter, is below.
• The AT+F[parameter]=? command returns the current option for the parameter, or if
the parameter is not supported, it returns ERROR. An example, showing the
+FCLASS parameter, is below.
+FCLASS?		Service Class.
		Reads the modem’s Service Class.
	0	Data modem
	1	Service Class 1 fax modem
	2.0	Service Class 2.0 fax modem
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.

B-28