Toshiba B-SX4T-GS20-QM-R manual

(2)Where the Saved Data Call Command is used: Power ON

	Place paper	[ESC] XQ: Calls the label format stored in the flash
		memory card.
		or
Saved Data Call Command
		[ESC] XT: Calls the label format stored in the ATA
		card.

Feed Command

[ESC] T: Feeds one sheet of paper and aligns it with the first print position.

Bit Map Font Data Command

Outline Font Data Command

Bar Code Data Command

Issue Command

Yes <Change data issue>

No

Yes <Label change>

No

[ESC] RC: Draws bit map font data.

[ESC] RV: Draws outline font data.

[ESC] RB: Draws bar code data.

[ESC] XS: Issues (prints) the label.

Power OFF

NOTES: (1) When placing new paper, the Feed Command must always be sent. When using the same paper after the power is turned off and on, the Feed Command may be omitted.

(2)If the option for “automatic call at power on” for the Saved Data Call Command has previously been selected, the Saved Data Call Command may be omitted after the power is turned off and on.

(3)Where the XML data is used:

Print data in XML format can be sent to the printer.

*For details, refer to the XML Data Print Specification (TAA-1320).

- 33 -