Toshiba B-SX4T-GS20-QM-R manual Upper line Printer Status, 274

10. LCD MESSAGES AND LED INDICATIONS

The model and the firmware version are displayed on the lower line of the LCD.

	LCD Messages of			LED Indication				Restoration	Acceptance
								by the	of Status
No.	Upper line						Printer Status	[RESTART]	Request
								key	Reset
	(English)
				POWER	ON LINE	ERROR		Yes/No	Command
									Yes/No
1	ON LINE			{	{	z	In the online mode	-	Yes
	ON LINE			{		z	In the online mode	-	Yes
							(Communicating)
2	HEAD OPEN			{	z	z	The head was opened in the	-	Yes
							online mode.
3	PAUSE		****	{	z	z	In a pause state	Yes	Yes
4	COMMS ERROR			{	z	{	A parity error or framing error	Yes	Yes
							has occurred during
							communication by RS-232C.
5	PAPER JAM		****	{	z	{	A paper jam occurred during	Yes	Yes
							paper feed.
6	CUTTER ERROR****			{	z	{	An abnormal condition occurred	Yes	Yes
							at the cutter.
7	NO PAPER		****	{	z	{	The label has run out.	Yes	Yes
8	NO RIBBON		****	{	z	{	The ribbon has run out.	Yes	Yes
9	HEAD OPEN		****	{	z	{	A feed or an issue was	Yes	Yes
							attempted with the head
							opened.
							(except the [FEED] key)
10	HEAD ERROR			{	z	{	A broken dot error has occurred	Yes	Yes
							in the thermal head.
11	EXCESS HEAD TEMP			{	z	{	The thermal head temperature	No	Yes
							has become excessively high.
12	RIBBON ERROR****			{	z	{	An abnormal condition occurred	Yes	Yes
							in the sensor for determining the
							torque for the ribbon motor.
13	REWIND FULL ****			{	z	{	An overflow error has occurred	Yes	Yes
							in the rewinder.
14	SAVING	#### &&&&		{	{	z	In writable character or PC	-	Yes
	SAVING	%%%%%%%					command save mode
15	FLASH WRITE ERR.			{	z	{	An error has occurred in writing	No	Yes
							data into memory for storage
							(flash memory card, the ATA
							card, or flash ROM on the CPU
							board).
16	FORMAT ERROR			{	z	{	An erase error has occurred in	No	Yes
							formatting memory for storage
							(flash memory card, the ATA
							card, or flash ROM on the CPU
							board).
17	FLASH CARD FULL			{	z	{	Saving failed because of the	No	Yes
							insufficient capacity of memory
							for storage (flash memory card,
							the ATA card, or flash ROM on
							the CPU board).

- 274 -