Toshiba B-SX4T-GS20-QM-R manual Cut position Head position

[C: Batch (Cut)]

•“Automatic forward feed standby” is set to ON in the system mode.

•The swing cutter is used.

Cut position Head position

(1) Place paper.

(2)Completes a feed.

(Completes feeding to the top of paper.)

(3) Feeds to the cut position.

(4) Cuts unnecessary paper.

(5)Feeds back to the home position.

(6)After 1 second, performs 13.7-mm automatic forward feed.

[C: Batch (Cut)]

•“Automatic forward feed standby” is set to OFF in the system mode.

•The rotary cutter is used.

Cut position Head position

(1) Place paper.

(2)Completes a feed.

(Completes feeding to the top of paper.)

(3) Feeds to the cut position.

(4) Cuts unnecessary paper.

(5)Since non-stop cutting is performed, paper is fed and stopped over the cut position.

(6) Feed back to the home position.

- 182 -