Toshiba B-SX4T-GS20-QM-R manual Position Fine Adjust Command ESC AX

6.3.2 POSITION FINE ADJUST COMMAND [ESC] AX

Function

Format

Term

cAdjusts the feed value so that the label will be shifted forward or backward from the automatically set first print start position.

dAdjusts the cut position so that the label will be cut at a position shifted forward or backward from the automatically set cut position, or adjusts the strip position so that the label will be shifted forward or backward from the automatically set strip position.

eAdjusts the value for feeding the label back to the home position after cutting, or adjusts the value for feeding the label back to the home position after stripping.

[ESC] AX; abbb, cddd, eff [LF] [NUL]

a:Indicates the direction, forward or backward, in which a fine adjustment is to be made.

+: Backward

-: Forward

bbb:Feed value to be finely adjusted.

000 to 500 (in 0.1 mm units)

c:Indicates the direction, forward or backward, in which a cut position (or strip position) fine adjustment is to be made.

+: Backward

-: Forward

ddd:Fine adjustment value for the cut position (or strip position). 000 to 500 (in 0.1 mm units)

e:Indicates whether the back feed is to be increased or decreased. +: Increase

-: Decrease

ff:Back feed length fine adjustment value 00 to 99 (in 0.1 mm units)

- 43 -