Toshiba B-SX4T-GS20-QM-R manual 118

Explanation

(1)Bar code number

When drawing by the Data Command ([ESC] RB), the format designated by the bar code number is selected.

(2)Print origin of coordinates

		Backing paper				Backing paper
Origin of
		Label				Label
coordinates
(0, 0)
		Print origin of
Effective		coordinates	Effective
print			print			Print origin of
length			length
						coordinates
	X	Effective			Effective	Origin of
0						coordinates
		print width		Y	print width	(0, 0)
Y		Paper feed direction		0	Paper feed direction
			X
[Print direction: Printing bottom first]				[Print direction: Printing top first]

The print origin of coordinates must be set so that the bar code drawing result will be within the effective print area set by the Label Size Set Command ([ESC] D).

[Effective print area] [mm]

		Model
	Issue mode
Item
Effective print width			Min.
			Max.
Effective print
length
	Label		Min.
			Max.
	Tag		Min.
			Max.

		B-SX4T					B-SX5T
			Cut					Cut
		Swing	Rotary cutter				Swing	Rotary cutter
Batch	Strip	cutter	Head-up	Head-up	Batch	Strip	cutter	Head-up	Head-up
			operation	operation				operation	operation
			not	performed				not	performed
			performed					performed
		10.0					10.0
		104.0					128.0
			3 ips:	3 ips:				3 ips:	3 ips:
			79.0	30.0				79.0	23.0
6.0	21.4	23.0	6 ips:	6 ips:	6.0	21.4	23.0	5 ips:	5 ips:
			91.0	30.0				87.0	23.0
			10 ips: –	10 ips: –				8 ips:	8 ips:
			(NOTE 1)	(NOTE 1)				98.0	23.0
1496.0			1492.0		1496.0			1492.0
			3 ips: 28.0					3 ips: 28.0
8.0	–	23.4	6 ips: 28.0		8.0	–	23.4	5 ips: 28.0
			10 ips: – (NOTE 1)					8 ips: 36.0
1498.0	–		1498.0		1498.0	–		1498.0

NOTE 1: The use of the rotary cutter at 10 ips is not supported for the B-SX4T.

- 118 -