Toshiba B-SX4T-GS20-QM-R manual First print position home position after back feed

[Strip Position Fine Adjustment]

4mm

3mm

0.0mm

+3.0 mm

-3.0 mm

2 mm

Printing in strip issue mode is stopped at the position where the distance from the middle point of the label-to-label gap to the end of the strip shaft is 4 mm, since the label-to-label gap is assumed to be 2 mm.

When the print stop position is not proper, the print stop position should be adjusted using the strip position fine adjust function. When the label-to-label gap is 5 mm or more, the effective print length should be set to the maximum (label pitch -2 mm). Then, the print stop position should be adjusted using the strip position fine adjust function.

[Back Feed Fine Adjustment] (To finely adjust the back feed for shifting backward or forward)

0.0 mm

First print position (home position after back feed)

+3.0 mm

First print position (home position after back feed)

- 3.0 mm

First print position (home position after back feed)

Paper feed direction

- 45 -