LCD Message of

 

 

Detail Status

Upper Line

 

Printer Status

Auto Status

Status

(English)

 

 

Transmission

Request

 

 

 

 

Command

 

 

 

 

EEPROM ERROR

An EEPROM for back up cannot be read/written

 

properly.

 

 

SYSTEM ERROR

(a) A command has been fetched from an odd

 

 

address.

 

 

 

(b)

Word data has been accessed from a place

 

 

 

 

other than the boundary of the word data.

 

 

 

(c)

Long word data has been accessed from a

 

 

 

 

place other than the boundary of the long word

 

 

 

 

data.

 

 

 

(d)

An undefined command in a place other than

 

 

 

 

the delay slot has been decoded.

 

 

 

(e)

An undefined command in the delay slot has

 

 

 

 

been decoded.

 

 

 

(f)

A command which rewrites the data in the

 

 

 

 

delay slot has been decoded.

 

 

-

A void pattern printing is completed.

60

---

 

When data cannot be written onto the RFID tag

 

 

 

properly, the printer prints the void pattern to

 

 

 

indicate that this tag is faulty, and then,

 

 

 

automatically retries according to the setting for the

 

 

 

maximum number of RFID write retries. When the

 

 

 

void pattern printing is completed, the printer sends

 

 

 

this status.

 

 

RFID WRITE ERROR

When writing data onto the RFID tag continuously

61

61

 

failed for the maximum number of RFID write

 

 

 

retries, the printer enters an error state and sends

 

 

 

this status.

 

 

RFID ERROR

When the printer cannot communicate with the

62

62

 

RFID module, due to a failure of the RFID module

 

 

 

or some other reasons, this error occurs.

 

 

-

Writing data onto an RFID tag succeeded.

---

---

 

When a data write, performed by an RFID Data

 

 

 

Write Command (@012), succeeded, this status is

 

 

 

returned.

 

 

-

Writing data onto an RFID tag failed.

---

---

 

When a data write, performed by an RFID Data

 

 

 

Write Command (@012), failed, this status is

 

 

 

returned.

 

 

INPUT PASSWORD

The printer is waiting for a password to be entered.

---

---

PASSWORD INVALID

Password entered was not correct consecutively for

---

---

 

three times.

 

 

RFID CONFIG ERR

B-SX704-RFID-U2-US-R only

65

65

 

RFID module’s destination code is not specified

 

 

- 270 -

Page 274
Image 274
Toshiba B-SX4T-GS20-QM-R manual An Eeprom for back up cannot be read/written Properly