Antex electronic TriplePlay Multizone Satellite Audio Receiver Blocking Channels, Preset to Exit

Blocking Channels

Using the Parental Control feature, you can block specific channels so that can be accessed only with a pass code that you define. Parents find this feature useful for preventing their children access to specific content.

To block a channel:

1.Press and hold the POWER button to enter SETUP mode.

2.Press the CHANNEL down button to highlight “PARENTAL CONTROL,” and then press the SELECT button. A screen similar to that shown below appears.

SRX-3 TriplePlay

ENTER PASSWORD

XXXX

Press SELECT to Accept

Preset to Exit

“XXXX” will appear for the password. You must set a password (if this is the first time at this menu) or enter a previously set password to proceed. Be careful to use a familiar number. Write this number down for future reference.

Pass code: _________________________

3.Enter 4 digits with the numeric buttons or remote, and then press SELECT. (To exit this menu without setting or entering the password and return to the previous menu, press the PRESET button.)

After you have entered the password successfully, the following menu will appear.

TriplePlay Multizone Satellite Audio Receiver 9

SRX-3 TriplePlay

PARENTAL CONTROL

CHANGE PASSWORD

BLOCK CHANNELS

RETURN

Note that you can change the password by repeating steps 1 through 3.

4.Scroll to highlight “BLOCK CHANNELS”, and then press the SELECT button. A menu similar to that shown below appears.

SRX-3 TriplePlay

PARENTAL CONTROL

ZONE 1

70 Planet Jazz BLKd

Press SEL to Return

UP/DN to select Channel

LF/RT to change Status

Zone to change Zone

—Use the CHANNEL up/down buttons to scroll to the channel you want to block.

—Use the CATEGORY left/right buttons to toggle the status between blocked “BLKd” or unblocked “NRML”.

5.Block (or unblock) as many channels as you choose. When finished, press the SELECT button to return to the default display.

© 2003 Antex Electronics, Inc.