RX Operation
4 To select Memory RX ON, use the left and right Arrow Keys to select ON and press YES.
5 Enter the time you wish to start receiving messages into memory.
Note: If the ON and OFF time are identical,
messages will always be received into
memory.
6 Enter the time you wish to stop receiving messages into memory.
*ON OFF
-SELECT&PUSH”YES”-
ON TIME=_0:00
OK=YES
OFF TIME=_0:00
OK=YES
7 You have to enter a password for this to work.
PASSWORD=
OK=YES
8 If you have your unit programmed for Memory RX with the Timer turned ON and a Password required, your screen shows the following message.
9 The ready message for your unit now shows that Memory RX is active.
-SET DOC.FACE DOWN-
Facsimile Programming | 4 - 32 |
