Dial Registration

7

8

Enter the 20-digit Relaybox ID.

Enter the 20-digit Relaybox password.

RELAYBOX ID= OK=YES (DEL=NO)

PASSWORD= OK=YES (DEL=NO)

Once this function has been programmed, you use it by

simply pressing the One-Touch Key you have just programmed. This is documented in Chapter 3 Advanced Facsimile.

Edit/Deleting

1 If you wish to change any entry, a screen allows you to accept or change.

2 If you wish to change a Key that was previously programmed, this message appears. Press YES to keep this location as is, or NO if you wish to edit it.

REGISTERED! KEEP? OK=YES (EDIT/DEL=NO)

3 If you choose NO, use the arrow keys to select either EDIT or DELETE and then proceed with the needed changes.

EDIT *DELETE -SELECT&PUSH”YES”-

Batch TX

You can program your single location One-Touch Key to automatically batch documents. By assigning a batch time to a programmed One-Touch Key, you can eliminate repeated calls to the same number throughout the day. Your unit calls the remote unit at a preset time and transmits all documents stored in memory for this particular destination in one phone call.

Entering

1 Press the PROGRAM Key and scroll through the menus until you reach the DIAL REGISTRATION Menu. Press YES to begin programming.

2 Press 5 or scroll down to the Batch TX menu and press YES.

3 Press the One-Touch Key you wish to use.

DIAL REGISTRATION? YES / or 1-6

5 BATCH TX?

OK=YES

-SELECT REGIST.KEY- OK=YES

Facsimile Programming

4 - 24

Page 102
Image 102
LG Electronics MF2800, MF3800 manual Batch TX, Relaybox ID= OK=YES DEL=NO PASSWORD= OK=YES DEL=NO