Set Printer
6 - 5 PC Printing & Scanning

PCL4 Enhance

Allows users to select PCL4 printer emulation which supports 300 dpi. If the
LCD displays, “PCL4/GDI CHANGE, RESTART YOUR FAX” because
memory reallocation (refer to Memory re qu ired for printer” ), it is necessary to
power OFF the fax machine and then turn the power back ON (wait
approximately 6 seconds before turning unit back ON).
Note: Please be sure to print (clear) any documents from Fax
memory before selecting PCL4 ENHANCE.
1Press the PROGRAM Key and scroll
through the menus until you reach the Set
Printer menu and press YES.
2Press 7 or scroll down to the PCL4
Enhance menu and press YES.
3Select either ON or OFF depending on
your needs. Press YES to accept this data
into memory.
4If you chose YES, you must restart your
unit to make this change active.
SET PRINTER?
YES / or 1-8
7 PCL4 ENHANCE?
OK=YES
ON *OFF
-SELECT&PUSH”YES”-
PCL4/GDI CHANGE
RESTART YOUR FAX