LG Electronics MF2800 manual Basic Operations of Internet Fax, Manual TransmissionSingle Location

Setting up the Internet Fax

Basic Operations of Internet Fax

Manual Transmission(Single Location)

The procedure to manually send an E-mail message from your device is very similar to manually transmitting a document to a facsimile device over the telephone line.

1 Place the documents in the Document Feeder.

2 Press the MAIL Key on the control panel.

3 Enter the E-mail address.Then press START to begin the transmission.

ENTER FAX NO. or FUNCTION

*INTERNET FAX*

TO=

OK=START (FROM= )

********

@T (jim@aol.com) 99%

-SET DOC. FACE DOWN-

*TX COMPLETE*

1 If you want to change the FROM: location in the E- mail message, press the Down Arrow Key.

TO=

OK=START (FROM=

)

2 Enter the E-mail address you want to appear in the FROM and press START. If you want to change the location for reply, press the Down Arrow Key.

FROM=

OK=START (REPLY=

)

3 Enter the E-mail address for replies and press START. If you want to change the encoding method used for the TIFF attachment, press the Down Arrow Key.

REPLY=

OK=START (CODING=

)

4 Use the Left/Light Arrow Key to change the coding selection. You must be sure that the remote location can handle the coding type. Then press YES to transmit.

MH MR *MMR JBIG -SELECT&PUSH”YES”-

Internet Fax(Option) 5-12