IX Safety Information
WAR NIN G:
The design and production of this unit conform to FCC regulations,
and any changes or modifications must be registered with FCC and
are subject to FCC control. Any change made by the purchaser or
user without first contacting the manufacture will be subject to
penalty under FCC regulations.
Note: *A LAN adapter (Minolta Network) is to be used only in industrial areas.
Use of a LAN adapter in residential areas.
*This device must be used with shielded interface cables. The use of non -
shielded cables is likely to result in Interference with radio
communications and is prohibited under FCC Rules.
*The design and production of this unit conforms to FCC regulations,
and any change or modifications must be registered with the FCC and
are subject to FCC control. Any change made by the purchaser or user
without first contacting the manufacturer will be to penalty under FCC
regulations.
FCC PART 15 - RADIO GREQUENCY DEVICES WARNING
The Facsimile Unit (MINOLTAFAX2800/3800) with the Minolta Network option
installed meets the FCC Class A requirements when the network cable is at tached ei ther of
the IEEE 802.3 connectors.
WAR NIN G:
This equipment has been tested and found t o comply with limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is oper ated in a commercial
environment. This equipment generate, users, and radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause
harmful interference at his own expense. This device must be used
with shielded cables likely to result in interference with radio
communications and is prohibited under the FCC Rules. The design
and production of this unit conform to FCC regulations, and any
changes or modifications must be registered with the FCC and are
subject to FCC control. Any changes made by the purchaser or user
without first contacting the manufacturer will be subject to penalty
under FCC regulations.