TX Operation
Facsimile Programming 4 - 30

Header

The header prints the sender machine name, fax number, date/time and page number at
the top of the sheet at the remote location. This is req uired by the FCC in the USA and is
regulated in other way in other countries. In the USA you will have one of the following
options.
Inside the Body: This places the header in the first 5mm of the copy top. It does
not shift the copy down. Some copy may be overwritten.
Outside the Body: This places the header in the first 5mm of the copy top. It
then start the body below this. Depending on the remote machine settings one of
three things happen: 1) because the copy is not a full page, the copy fits below
the header at 100%, 2) the copy is reduced to fit th e page, or 3) the copy is split
into two pages at 100%.
1Press the PROGRAM Key and scroll through the
menus until you reach the TX Operation Menu.
Press YES to begin programming.
2Press 4 or scroll down to the Header menu and
press YES.
3Select if you wish to turn the header ON or OFF
and press YES.
Note: This is not an option in the USA and the message will not appear.
Note: In the USA you can have the header print inside or outside the text
area. For assistance, contact your Service Representative.
Note: This function is not available for North American.
TX OPERATION?
YES / or 1-4
4 HEADER?
OK=YES
*ON OFF
OK=YES