TX Operation

TX Operation

Default TX

This function is used to set the default TX mode of the fax unit. Two options are

available:

Choices Available

Description

 

 

Memory TX

When set in this mode, documents are scanned into memory for

 

transmission and dialing starts after the first pages is scanned (Quick

 

TX).

 

 

ADF TX (Direct

When set in this mode, documents are scanned for transmission after

Transmission)

connection has been made to the receiving unit. (When the available

 

memory is insufficient, please select ADF TX for a successful

 

transmission)

 

If line is not available, the message “LINE IS BUSY” will be

 

displayed. The facsimile will retry based on the number of redial

 

attempts and intervals that were preset.

 

 

Note: In Memory Transmission Mode, you can retrieve your original

document sooner than you can in ADF TX (Direct Transmission) Mode.

1 Press the PROGRAM Key and scroll through the menus until you reach the TX Operation Menu. Press YES to begin programming.

2 Press 1 or scroll down to the Default TX menu and press YES.

3 Using the Left and Right arrows, select the option you wish to have as the default and press YES to enter this selection into memory.

TX OPERATION?

YES / or 1-2

1 DEFAULT TX? OK=YES

*MEM TX ADF TX

-SELECT&PUSH”YES”-

4 - 27

Facsimile Programming

Page 105
Image 105
LG Electronics MF3800, MF2800 manual TX Operation, Tx Operation?, Default TX? OK=YES MEM TX ADF TX SELECT&PUSHYES