Setting Up Fax Unit
Loading Paper
1 Remove the shipping tape from the Tray Cover.
2
3 Remove the shipping tape and foam from inside the Tray cavity.
4 If you are loading Letter or
A4 size paper, pull the Tray Extension out to the first stop.
5 If you are loading Legal size paper, lift the Tray Extension slightly and pull it out to the second stop.
6 Place a piece of paper in the tray and test to see the Side Guides are in the correct position for your paper.
7 To change the positions of the Guides to a new size paper, snap them out and re- locate them.
8 Place paper in the Tray and push the Tray Extension in against the end of the paper.
Note: Refer to the Specifications Chapter for information on what type and size papers can be fed from this Tray.
9 Replace the Tray Cover.
Note: When placing paper in the Tray, always remove any remaining paper and place it on top of the new paper.
A - 9 | Unpacking & Installation |
