Setting Up the (Optional) SPCU
Unpacking & Installation A - 14
Installing the SPCU
1Take the (Optional) SPCU
from the shipping carton.
2Remove the vinyl bag and
peel off the shipping tape.
3Remove the shipping tape
and cardboard from the gear
area.
4Remove any shipping
material and tape from the
Cassette cavity.
CAUTION
Before proceeding, make sure the Main ON/OFF Switch on the Fax
unit is in the OFF position.
5Place the Fax unit on top the
SPCU making sure the three
Aligning Posts and the
Power Connector are
carefully aligned.